A 10× loupe answers most of it. A blue or orange flash inside cracks and flattened bubbles mean a glass-filled ruby; curved growth lines mean a lab-grown one; a seam around the side means a garnet-and-glass doublet. Natural rubies are almost all heat-treated, so assume yours is. Whether a clean, vivid stone is natural or lab-grown is a question for a lab.
First, what “real” means for a ruby
Ruby is red corundum — aluminium oxide coloured by chromium — with a hardness of 9. A red stone sold as ruby can be one of five quite different things:
- Natural ruby. Mined corundum. GIA tells buyers to assume a ruby has been heated: heating to improve colour is almost universal.
- Lab-grown ruby. Real corundum grown in a factory, the same material as a natural ruby. In the United States it has to be sold as “laboratory-grown”, “laboratory-created” or similar; GIA notes it is usually called “created”.
- Glass-filled (composite) ruby. Low-grade, heavily cracked corundum with its fractures filled with lead glass. GIA calls the heaviest fillings manufactured products of lead glass and ruby, and under the FTC’s Jewelry Guides they may not be sold as plain “ruby” or even “treated ruby”.
- A different red stone. Red spinel and red garnet have both been sold as ruby. The Black Prince’s Ruby in the British Imperial State Crown is a spinel — spinel was only told apart from ruby in 1783.
- Glass or a doublet. Red glass, or a thin slice of garnet fused onto coloured glass.
So “real or fake” is really two questions: is it corundum at all, and if it is, is it natural, lab-grown or glass-filled? A loupe gets you a long way on both.
Six checks that help, from loupe to lab
1. Look for a blue or orange flash (glass filling)
This is the check that matters most for rubies sold today. Clean the stone and look into it with a 10× loupe while you tilt it under a bright light. In a lead-glass-filled ruby, GIA found a blue and orange “flash” along the filled cracks, fractures that look almost invisible, and gas bubbles that are flattened or rounded, trapped in the glass. GIA’s verdict on the treatment is that it is easily detected with magnification. Don’t rely on surface shine: the glass can look duller, the same or brighter than the ruby around it.
2. Look for curved growth lines (flame-fusion lab ruby)
Auguste Verneuil announced his flame-fusion process in 1902, and GIA calls it still the least expensive and most common way to grow gem crystals such as ruby — so a lab-grown ruby can sit in a ring more than a century old. Under a loupe, flame-fusion stones can show curved growth lines — like the grooves of a record — and tiny round gas bubbles. Natural rubies grow with straight lines and angular colour zones, often with fine needles of “silk”. Curved lines settle it; their absence doesn’t, because not every lab-grown ruby is made by flame fusion — GIA names flux growth as another method.
3. Check the side for a seam (doublets)
Garnet-and-glass doublets have been made since around 1850: a thin garnet top fused to coloured glass, so the stone shows the colour of the glass. Turn the stone and look at its side in reflected light for a line where two materials meet. Bubbles at the join give it away too, though GIA notes they are easy to miss without high magnification.
4. Read the paperwork and the wording
How a ruby was described when it was sold tells you a lot. Under the FTC’s Jewelry Guides, a seller must disclose a treatment that isn’t permanent, needs special care or significantly affects value; a lab-grown ruby must carry a word such as “laboratory-created”; and a lead-glass composite may be called “composite”, “hybrid” or “manufactured” only with a clear statement that it lacks the characteristics of ruby and needs special care. Words like “created”, “composite” or “glass-filled” on a receipt or tag answer the question for you. “Faux” is not an adequate disclosure under the Guides.
5. A jeweler’s refractometer
Ruby, spinel and garnet can look alike, but they bend light differently. GIA gives ruby a refractive index of 1.762 to 1.770 with double refraction of 0.008 to 0.010; spinel reads about 1.718 and garnet anywhere from 1.714 to 1.888, and neither is doubly refractive. A jeweler with a refractometer separates them in a minute. It can’t tell a natural ruby from a lab-grown one, which give the same readings.
6. A lab report
For a stone that might be valuable, an independent lab is the only way to learn whether the ruby is natural or lab-grown, whether it has been heated, and how much glass it contains. GIA’s reports describe glass filling in plain words — from clarity enhancement with lead glass filler to “manufactured product” for the heaviest cases — and a natural, unheated ruby is exactly what a report exists to prove.
Sorting a jewelry box? Ring Identifier: Jewelry Value reads the style, the setting and the stones from a photo and gives a ballpark of what a piece is and what it might be worth. A photo can’t see a glass flash or curved growth lines — use it to decide which pieces deserve a loupe and a jeweler, not instead of them.
Four tests that prove nothing
- Scratching glass. GIA points out that anything as hard as glass or harder — 5 to 6 on the Mohs scale — can scratch it. Natural ruby, lab-grown ruby, spinel and garnet all can. And because natural and lab-grown ruby are the same mineral with the same hardness, no scratch test can separate them.
- A UV light or blacklight. Ruby often glows red under longwave UV, but GIA warns that lab-grown rubies can fluoresce extremely strongly, that some natural rubies glow strongly too, and that fluorescence testing alone can’t identify a stone.
- A flashlight. Shining a light through the stone shows its colour and how clear it is. A lab-grown ruby is the same chromium-coloured corundum as a natural one, so colour and glow can’t separate them; a flawless, intensely bright stone is, if anything, a reason to look harder for curved lines.
- Lemon juice, vinegar or other acid “tests”. They prove nothing and can ruin a glass-filled ruby. In GIA’s tests, even concentrated lemon juice damaged the lead-glass filler, and a jeweler’s pickling solution etched it within a minute.
If it is glass-filled: how to look after it
A composite ruby can still be a pretty piece of jewelry, but it is fragile in ways a natural ruby isn’t. GIA advises cleaning filled stones only with a damp cloth and keeping them away from acids, even mild ones. Tell any jeweler before a repair or resizing: the pickling solution used after soldering etches the glass, and heat melts the filler at 600 to 700 °C. The Lab Manual Harmonisation Committee — a group of gem labs including GIA — warns that if the glass is altered, a heavily filled stone may fall into pieces.
Putting the results together
- Blue or orange flash, flattened bubbles in cracks — glass-filled (composite) ruby. Valued as a composite, and handled with care.
- Curved growth lines, round bubbles — flame-fusion lab-grown ruby: real corundum, priced as a lab-grown stone.
- A seam around the side — a garnet-and-glass doublet.
- None of the above, natural-looking inclusions and silk — probably natural ruby, very likely heated. A lab report says whether it is heated and confirms it is natural.
- Red, but readings outside ruby’s range — spinel, garnet or glass. Our guide to identifying the stone in a ring helps narrow it down.
- Do first
- A 10× loupe: look for flash, bubbles, curved lines and a side seam
- Glass-filled
- Blue or orange flash in cracks; flattened bubbles
- Lab-grown
- Curved growth lines and round bubbles (flame fusion, since 1902)
- Not ruby at all
- Spinel ~1.718 and garnet 1.714–1.888 on a refractometer, singly refractive
- Ruby numbers
- Hardness 9 · specific gravity about 4.00 · refractive index 1.762–1.770
- Skip
- Scratching, UV glow, a flashlight and acid tests
The takeaway
Most of the answer is under a loupe: glass filling flashes, flame-fusion rubies show curved lines, and doublets show a seam. A refractometer separates ruby from spinel and garnet, and only a lab can confirm a natural ruby and whether it was heated — the questions that set the price. If the ruby is set in gold, our guide to telling real gold covers the metal, and what is my ring worth explains how a verified piece turns into an offer. For the rest of the jewelry box, see real versus costume jewelry.
At a glance
| Check | What it finds | Limit |
|---|---|---|
| Loupe: flash and flattened bubbles | Lead-glass-filled (composite) ruby | Needs a clean stone and bright light |
| Loupe: curved growth lines | Flame-fusion lab-grown ruby (since 1902) | Other lab rubies don’t show them |
| Side view: a seam | Garnet-and-glass doublet | Bubbles at the join are easy to miss |
| Receipt wording | “Created”, “composite”, “glass-filled” disclosures | Only as good as the seller |
| Refractometer | Ruby 1.762–1.770 vs spinel ~1.718, garnet 1.714–1.888 | Can’t tell natural from lab-grown |
| Lab report | Natural or lab-grown, heat, glass filling | — |
| Scratch, UV, flashlight, acid | Nothing reliable; acid damages glass-filled stones | Skip them |
Frequently asked questions
Are most rubies heat-treated?
Yes. GIA says almost all rubies are heat-treated to improve their colour and tells buyers to assume a ruby has been heated. A natural, unheated ruby is the exception, and a lab report is what proves it.
What is a glass-filled or composite ruby?
Low-grade, heavily fractured corundum whose cracks have been filled with lead glass. Under a 10× loupe it shows a blue or orange flash and flattened gas bubbles in the filled cracks. Under the FTC’s Jewelry Guides it may not be sold as plain “ruby” or “treated ruby”, and terms such as “composite” must come with a statement that it needs special care.
Is a lab-grown ruby a real ruby?
It is real corundum — the same material as a natural ruby — but it must be sold as laboratory-grown or laboratory-created in the United States, and GIA notes it is usually called “created”. Only a lab can tell it from a natural ruby with certainty.
Does a ruby glow under UV light if it is real?
Many rubies glow red under longwave UV, but GIA warns that lab-grown rubies can fluoresce extremely strongly and that fluorescence alone can’t identify a stone. A glow is not proof either way.
How can I tell a ruby from a garnet or spinel?
A jeweler’s refractometer does it in a minute: GIA gives ruby a refractive index of 1.762–1.770 with double refraction, spinel about 1.718 and garnet 1.714–1.888, neither doubly refractive. The Black Prince’s Ruby in the British crown is a spinel; the two weren’t told apart until 1783.
Sources and further reading
- 16 CFR Part 23 — Guides for the Jewelry, Precious Metals, and Pewter Industries — U.S. Electronic Code of Federal Regulations
- Ruby — GIA
- Ruby buyer’s guide — GIA
- Ruby: the royal gemstone — GIA
- Lead glass-filled rubies: identification and durability (McClure et al., Gems & Gemology, 2006) — GIA
- Lead glass-filled Burmese rubies (Lab Notes, Winter 2014) — GIA Gems & Gemology
- Ruby care and cleaning — GIA
- Information Sheet #3: Lead-glass filled corundum — Laboratory Manual Harmonisation Committee
- Synthetic gems — GIA
- Verneuil method — Wikipedia
- A DIY fluorescence guide for retailers — GIA
- Spinel — GIA
- Garnet — GIA
- FAQ about gemstones and diamond identification — GIA
- Doublet (lapidary) — Wikipedia
- Red herring in red garnet (Micro-World, Fall 2023) — GIA Gems & Gemology
- Ruby — Wikipedia
- Black Prince’s Ruby — Wikipedia
Links checked November 5, 2026.
Explore the apps
Fast, fun, AI-powered apps with 1M+ on the App Store. Find your next favorite.
Browse all apps